Plastics > Engineering Plastic Sheet and Shapes > Static Control & Conductive Plastics > ABSYLUX® CN-P (Conductive)

ABSYLUX® CN-P (Conductive)

Conductive Acrylonitrile-Butadiene-Styrene
Carbon-powder-filled conductive material with high strength and stiffness, and relatively high impact strength. This material is easily machined and fabricated into close tolerance finished parts.

MECHANICAL
Tensile Strength @ Yield • 10³psi • 4.0
Tensile Elongation @ Break • % • 10.0
Izod Impact Strength
Notched • ft-lbs/in • 1.6
Unnotched • ft-lbs/in • 13.0
THERMAL
Heat Deflection Temperature
264 psi • °F • 170
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 10² - 10⁶
Volume Resistivity Dry • ohms/cm • 10² - 10⁶
Static Delay, 15% RH • seconds • 0.03(+5000volts) / 0.04(-5000volts)
OTHER
Specific Gravity • 1.13
Water Absorption/24hr • % • 0.30

Quick Plastic Links for Ridout Plastics
Your Plastic Supplier for All Plastic Sheet, Plexiglass, Lexan, Mylar® clear polyester, UHMW, Plastic Fabrication, Manufacturing

Plexiglas® is a registered trademark of Arkema, Inc. Ridout Plastics is an authorized distributor of Plexiglas® acrylic sheet. Plexiglas® is commonly mis-spelled as Plexiglass. Mylar® is a registered trademark of DuPont for their brand of clear polyester film.

| Plexiglass Sheet | Engineering Plastics | Plastic Sheet | Lexan Thermoclear Sheet | Plastic Adhesives | Fiberglass Sheet & Shapes | Plastic Polish & Glue | Plastic Fabrication | Plexiglass Primer | Plastic Links | Buy Plexiglass On-Line | Brochure Holders | Site Map | About Us |

Search our Site for Answers!