Plastics > Tools, Adhesives, Lighting > Drill Bits
Drill BitsThese are specially ground flukes with a 90° point for drilling holes in acrylic plastics including, Plexiglas®, Lucite® and Acrylite® materials. Metal drill bits will not work as they are made to bite into the metal as they are pushed into it. If they are used on acrylics they will chip and cause other damage to the plastic. When drilling holes for screws, you must make the hole larger than the screw itself to allow for expansion and contraction of the material. If not you will cause stress cracks at the hole and they will spread! please visit our On-Line Store. |
Your Source for All Plastics, Plexiglass, Lexan, Mylar, UHMW, Plastic Fabrication, Manufacturing Plexiglas® is a registered trademark of Arkema, Inc. Ridout Plastics is an authorized distributor of Plexiglas® acrylic sheet. Plexiglas® is commonly mis-spelled as Plexiglass. | Plexiglass Sheet | Engineering Plastics | Plastic Sheet | Lexan Thermoclear Sheet | Plastic Adhesives | Fiberglass Sheet & Shapes | Plastic Polish & Glue | Plastic Fabrication | Plexiglass Primer | Plastic Links | Buy Plastics On-Line | Brochure Holders | Site Map | About Us | Search our Site for Answers! |