ACRYLIC: CHEMICAL RESISTANCE

E - 30 days of constant exposure with no damage. Plastic may even tolerate chemical for years.

G - Little or no damage after 30 days of constant exposure to the reagent.

F - Some effect after 7 days of constant exposure to the reagent. Solvents may cause softening, and swelling.

N - Not recommended for continuous use. Immediate damage may occur such as severe crazing, cracking, or permeation losses.





'.	Conditions (68 deg F) at 20 deg C	Conditions (122 deg F) at 50 deg C
Acetaldehyde	G	F
Acetamide (saturated)	E	E
Acetic Acid 5%	E	G
Acetic Acid 50%	N	N
Acetic Acid, Glacial	N	N
Acetic Anhydride	N	N
Acetone	N	N
Acetonitrile	N	N
Acrylonitrile	N	N
Adipic Acid	G	F
Alanine	E	G
Allyl Alcohol	N	N
Aluminum Hydroxide	G	F
Aluminum Salts	E	E
Amino Acids	E	G
Ammonia	G	F
Ammonium Acetate, saturated	E	E
Ammonium Glycolate	E	E
Ammonium Hydroxide, 50%	E	G
Ammonium Hydroxide, 5%	E	E
Ammonium Oxalate	E	G
Ammonium Salts	E	E
n-Amyl Acetate	N	N
Amyl Chloride	E	E
Aniline	N	N
Aqua regia	F	N
Benzaldehyde	F	N
Benzene	N	N
Benzoic Acid, saturated	E	G
Benzyl Acetate	N	N
Benzyl Alcohol	N	N
Bromine	N	N
Bromobenzene	N	N
Bromoform	N	N
Butadiene	G	G
n-Butyl Acetate	N	N
n-Butyl Alcohol	F	N
i-Butyl Alcohol	F	N
t-Butyl Alcohol	F	N
Butyric Acid	N	N
Butyl Chloride	N	N
Calcium Hydroxide, Conc.	G	G
Calcium Hypochlorite, saturated	G	F
Cellosolve Acetate	G	F
Carbazole	N	N
Carbon Disulfide	F	N
Carbon Tetrachloride	N	N
Cedarwood Oil	F	N
Chlorine, 10% in Air	E	E
Chlorine, 10% (Moist)	E	G
Chloroacetic Acid	N	N
p-Chloroacetophenone	N	N
Chlorobenzene	N	N
Chloroform	N	N
Chromic Acid, 10%	E	E
Chromic Acid, 50%	F	N
Cinnamon oil	N	N
Citric Acid, 10%	E	E
Cresol	N	N
Cyclohexane	N	N
Cyclohexanone	N	N
Cyclopentane	G	F
Decalin	F	N
n-decane	F	N
o-Dichlorobenzene	N	N
p-Dichlorobenzene	N	N
Diethyl Benzene	N	N
Diethyl Ether	F	N
Diethyl Ketone	N	N
Malonate	F	F
Diethylene Glycol	E	E
Diethylene Glycol Ethyl Ether	E	G
Dimethyl Formamide	N	N
Sulfoxide	N	N
1, 4-dioxane	N	N
Dipropylene Glycol	E	E
Diethylamine	G	G
Diacetone alcohol	N	N
1, 2-dichloroethane	N	N
2, 4-dichlorophenol	N	N
Dimethyl acetamide	E	E
Dioxane	N	N
Dibutyl phthalate	F	N
Dioctyl phthalate	F	N
Ethanol	F	N
Ether	F	N
Ethyl Acetate	N	N
Ethyl Alcohol (Absolute)	G	F
Ethyl Alcohol, 40%	E	E
Ethyl Benzene	N	N
Ethyl Benzoate	N	N
Ethyl Butyrate	N	N
Ethyl Chloride liquid	N	N
Ethyl Cyanoacetate	N	N
Ethyl Lactate	F	N
Ethylene Chloride	N	N
Ethylene Glycol	E	E
Ethylene Glycol Methyl Ether	E	G
Ethylene Oxide	E	G
Fatty Acids	E	E
Fluorides	N	N
Fluorine	N	N
Formaldehyde, 10%	E	E
Formaldehyde, 40%	E	G
Formic Acid, 35%	E	E
Formic Acid, 50%	G	G
Formic Acid, 98%-100%	N	N
Freon, TF	G	F
Fuel Oil	G	F
Gasoline	G	F
Acetic Acid, Glacial	N	N
Glycerine	E	E
Gluteraldehyde	G	F
n-Heptane	E	E
Hexane	E	E
Hydrochloric Acid, 15%	E	E
Hydrochloric Acid, 20%	E	E
Hydrochloric Acid, 35%	E	G
Hydrochloric Acid, 45%	F	F
Hydrochloric Acid, 48%	N	N
Hydrogen Peroxide, 3%	E	E
Hydrogen Peroxide, 30%	E	E
Hydrogen Peroxide, 90%	N	N
Hydrazine	N	N
Iodine Crystals	N	N
Isobutyl Alcohol	F	F
Isopropyl Acetate	N	N
Isopropyl Alcohol	F	N
Isopropyl Benzene	N	N
Isopropyl Ether	F	N
Jet Fuel	G	F
Kerosene	G	G
Lactic Acid, 35%	E	E
Lactic Acid, 85%	E	E
Lacquer Thinner	N	N
Mercury	E	E
Methoxyethyl Oleate	E	E
Methyl Alcohol	F	N
Methyl Ethyl Ketone	N	N
Methyl Isobutyl Ketone	N	N
Methyl Propyl Ketone	N	N
Methylene Chloride	N	N
Mineral Oil	E	E
2-Methoxyethanol	F	N
Methyl-t-Butyl Ether	G	F
Methyl Acetate	N	N
Mineral Spirits	F	N
Nitric Acid, 1-10%	E	E
Nitric Acid 50%	G	F
Nitric Acid 70%	F	N
Nitrobenzene	N	N
Nitromethane	N	N
n-Octane	E	E
Orange Oil	E	E
Oxalic Acid	E	E
Ozone	E	E
Perchloric Acid	N	N
Perchloroethylene	F	N
Phenol, Crystals	N	N
Phenol, Liquid	N	N
Phosphoric Acid, 85%	F	N
Phosphoric Acid, 1-5%	E	E
Picric Acid	N	N
Pine Oil	E	G
Potassium Hydroxide, 1%	E	E
Potassium Hydroxide, Conc.	E	G
Propane Gas	E	E
Propionic Acid	N	N
Propylene Glycol	E	E
Propylene Oxide	N	N
Resorcinol, saturated	N	N
Resorcinol, 5%	G	F
Salicylaldehyde	G	F
Salicylic Acid, Powder	F	F
Salicylic Acid, saturated	F	F
Salt Solutions, Metallic	E	E
Silicone Oil	E	E
Silver Acetate	E	E
Silver Nitrate	E	E
Sodium Acetate, Saturated	E	E
Sodium Chloride	E	E
Sodium Hydroxide, 1%	E	E
Sodium Hydroxide, 50% to Sat	E	E
Sodium Hypochlorite, 15%	E	E
Stearic Acid Crystals	E	E
Sulfur Dioxide, Wet or Dry	N	N
Sulfur salts	G	G
Sulfuric Acid, 1-6%	E	E
Sulfuric Acid, 20%	E	E
Sulfuric Acid, 60%	G	G
Sulfuric Acid, 98%	N	N
Sulfuric Acid, 98%	N	N
Tartaric Acid	E	E
Tetrahydrofuran	N	N
Thionyl Chloride	N	N
Toluene	N	N
Tributyl Citrate	F	N
Trichloroethane	N	N
Trichloroethylene	N	N
Triethylene Glycol	E	E
Tripropylene Glycol	E	E
Trichloroacetic Acid	N	N
1,2,4 Trichlorobenzene	N	N
2,2,4 Trimethylpentane	G	F
Tris buffer	E	E
Turpentine	F	N
Undecyl Alcohol	N	N
Urea	E	E
Vinylidene Chloride	N	N
Xylene	N	N
Zinc Stearate	E	E

The statements, technical information and recommendations obtained herein are believed to be accurate as of the date hereof. Since the conditions and methods of use of the product and of the information referred to herein are beyond our control, Arkema expressly disclaims any and all liability. NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OR MERCHANTABILITY, OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided herein relates only to the specific product designated and may not be applicable when such product is used in combination with other materials or in any process. The user should thoroughly test any application before commercialization. Nothing contained herein should be construed as an inducement to infringe any patent, and the user is advised to take appropriate steps to be sure that any proposed use of the product will not result in patent infringement.