|  | 
Plastics > Fiberglass Sheet, Grate & Profiles
Fiberglass Sheet and Structural Profiles
Fiberglass Pipe & Tube, Rod, Shapes
Fiberglass Grating - Molded and Pultruded
Fiberglass Handrail, Walkways, and Ladders
FRP Corrugated Fiberglass Panels
FRP Fiberglass Liner Panels
Fiberglass Custom Fabrication
In these pages you will learn about the advantages and benefits that Pultruded Fiberglass Composite Materials offer over traditional materials such as Wood, Aluminum, Steel, Thermoplastic, and other Thermo-set materials.
There are endless possibilities that these fiberglass products offer in a wide variety of existing applications such as Handrail Components, RF Transparent Cell-Site Enclosure Systems, and Cooling Towers, to name a few. You may also find an application or two that you have had the chance to view and enjoy personally, or have seen on recent cable TV programs. These applications include the Mesmerizing Dancing Fountains of the Bellagio Hotel on the Las Vegas Strip, to the Observation Deck overlooking the breath taking Niagara Falls, to the fiberglass walkway and aquarium supports at the Monterey Bay Aquarium in California. These applications all use the structural fiberglass composite materials.
Whether it is an application that is viewed by millions of people each year or an application that is buried well below the earth's surface, our Standard Structural FRP line and Custom Pultruded Profiles
meet or exceed the challenges of many markets. Call us today for solutions!
|
|  | | Fiberglass Structural Sheet
Flatsheet - Thickness ranging from 1/8" up to 3/4" stocked in 3 resin series. Typical stock lengths of 48" x 96". Special stock lengths include 48" x 144" and with a "mill run" and length can be run to optimize your yields.
| | |  | | Fiberglass Structural Profiles
Pultruded Fiberglass Composites are a proprietary combination of fiberglass reinforcements and thermosetting polyester or vinyl ester resin systems. It is produced in more than 100 standard shapes.
| | |  | | Fiberglass Compression Molded Grate
KORDEK® compression-molded Fiberglass Reinforced Plastic (FRP) gratings offer the best available combination of strength,durability and ease of installation. The compression-molded grating system is the only system of its kind in the world.
| | |  | | Fiberglass Open Molded Grate
Fiberglass Open Molded Grate is a one-piece, reinforced polyester or vinylester (FRP) grating, available in standard panels and sizes. It is manufactured by interweaving continuous, thoroughly wetted, fiberglass strand with thermosetting resin systems. Standard panels are available in four resin systems, two top surface configurations, four panel sizes and five standard grid patterns.
| | |  | | Fiberglass Pultruded Grating
Pultruded Grating has a primary advantage over molded FRP gratings (other than being generally lower in cost): It has superior load-supporting ability over longer spans. Pultruded Grating is the result of a continuous molding technique in which glass roving, glass matting and a synthetic surface veil are literally pulled (pultruded) simultaneously through a flame-retardant polyester or vinylester resin bath.
| | |  | | Fiberglass Fabrication
Ridout Plastics offers the industry's most comprehensive stocked premium grade Vinylester series to accommodate a wide variety of applications and corrosion resistant requirements to nearly every chemical environment. Fabricated systems offered by our clients include: raised flooring areas, secondary containment, pump, floor and wall pump base units, platforms, stairs, and Handrail Systems.
| | |  | | Fiberglass Handrails Walkways and Ladders
Ridout Plastics offers the industry's most comprehensive stocked premium grade Vinylester series to accommodate a wide variety of applications and corrosion resistant requirements to nearly every chemical environment. Fabricated systems offered by our clients include: raised flooring areas, secondary containment, pump, floor and wall pump base units, platforms, stairs, and Handrail Systems.
| | |  | | Fiberglass Corrugated Panels
FRP stands for Fiberglass Reinforced Panels. These sheets come flat or corrugated. Architects and engineers alike have long known the advantages of fiberglass panels in design and construction.
| | |  | | Fiberglass Liner Panels
Glasteel™ fiberglass reinforced panels combine custom blended polyester resins with specially engineered glass fibers to produce a tough, durable product with exceptional physical properties.
Glasteel™ panels resist impact, abrasion or other physical abuse. They will not rust, rot, corrode, peel, tear or warp. They can with stand concentrated chemicals, fumes, solvents and moisture and have a thermal stability range of (-65°F to +212°F.)
| | |  | | About FRP Composite Pultrusion
In general, FRP (Fiberglass Reinforced Plastic) represents a wide variety of manufacturing processes that utilize similar glass reinforcements in combination with both thermo-set and thermo-plastic resin systems. These systems also incorporate other ingredients such as fillers, catalyst, (UV) Ultra-Violet inhibitors, and pigment. All of the different processes focus on a common goal: to produce non-metallic parts that offer many advantages over traditional materials such as wood, concrete, aluminum and the many types of steel...
| |
|