|  | 
Plastics > Engineering Plastic Sheet and Shapes > Static Control & Conductive Plastics
 Static Control & Conductive PlasticsThe following 18 products are either anti-static, static dissipative or conductive materials. All products here are manufactured by Westlake. For more information on any of these products please call one of our industrial salesmen at 800-4-RIDOUT. Specification sheet is available upon request for any of these materials.
|
| | | ABSYLUX® CN-F (Conductive)
Conductive Acrylonitrile-Butadiene-Styrene
Non-sloughing, carbon-fiber-filled material with high strength and stiffness; easily machined.
Mechanical
Tensile strength @ yield • 103psi • 10.0
Tensile elongation @ break • % • 3.0
Flexural Strength • 103psi • 14.0
Izod Impact Strength
Notched • ft-lbs/in • 1.0
Thermal
Heat Deflection Temperature
264 psi • °F • 210
Flammability Rating, UL94 • (thickness:.030") • HB
Electrical
Surface Resistivity Dry • ohms/sq • 102 - 106
Volume Resistivity Dry • ohms/cm • 102 - 106
Other
Specific Gravity • 1.09
Water Absorption/24hr. • % • 0.32
| | | | | ABSYLUX® CN-P (Conductive)
Conductive Acrylonitrile-Butadiene-Styrene
Carbon-powder-filled conductive material with high strength and stiffness, and relatively high impact strength. This material is easily machined and fabricated into close tolerance finished parts.
MECHANICAL
Tensile Strength @ Yield • 103psi • 4.0
Tensile Elongation @ Break • % • 10.0
Izod Impact Strength
Notched • ft-lbs/in • 1.6
Unnotched • ft-lbs/in • 13.0
THERMAL
Heat Deflection Temperature
264 psi • °F • 170
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 102 - 106
Volume Resistivity Dry • ohms/cm • 102 - 106
Static Delay, 15% RH • seconds • 0.03(+5000volts) / 0.04(-5000volts)
OTHER
Specific Gravity • 1.13
Water Absorption/24hr • % • 0.30
| | | | | ABSYLUX® SD-A (Static-Dissipative)
Static-Dissipative Acrylonitrile-Butadiene-Styrene
Non-carbon-filled anti-static material which has high impact strength, good tensile and flexural strength, and is easily machined. Available in natural or black, it can be easily thermoformed in thinner gauges, and is bondable with WELD-ON® 1707
MECHANICAL
Tensile Strength@Yield • 103psi • 5.0
Tensile Elongation@Break • % • 13.0
Flexural Strength • 103psi • 8.0
Flexural Modulus • 103psi • 260.0
Izod Impact Strength
Notched • ft-lbs/in • 6.0
Unnotched • ft-lbs/in • No Break
Hardness - Shore D • 68
THERMAL
Heat Deflection Temperature
264 psi • °F • 160
Flammability Rating, UL94 • (thickness:.030") • HB
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 109 - 1011
Volume Resistivity Dry • ohms/cm • 109 - 1011
OTHER
Specific Gravity • 1.03
Water Absorption/24hr • % • 1.70
| | | | | LENNITE® CN-P (Conductive)
Conductive Ultra-High Molecular Weight Polyethylene
Carbon-powder-filled, self-lubricating, conductive material with excellent abrasion-resistance and high impact strength. This material is lightweight and easily machined, has good chemical and stress-crack resistance, and good wear-resistance.
MECHANICAL
Tensile Strength@Yield • 103psi • 5.7
Tensile Elongation@Break • % • 390.0
Flexural Modulus • 103psi • 140.0
Izod Impact Strength
Notched • ft-lbs/in • No Break
Hardness - Shore D • 68
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 102 - 106
Volume Resistivity Dry • ohms/cm • 102 - 106
OTHER
Specific Gravity • 0.969
| | | | | LENNITE® SD-P (Static-Dissipative)
Static-Dissipative Ultra-High Molecular Weight Polyethylene
Carbon-powder-filled, self-lubricating, moisture-repellent material with resistivity levels in the 105 - 109 range. This material has the highest impact strength, is lightweight, has excellent abrasion resistance, and possesses good chemical and stress-crack resistance.
MECHANICAL
Tensile Strength@Yield • 103psi • 3.13
Tensile Elongation@Break • % • 310.0(1)
Flexural Modulus • 103psi • 152.0
Hardness - Shore D • 67
THERMAL
Coefficient of Thermal Expansion • in/in/°F • 8.2 x 10-5
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 12.0 x 106
Volume Resistivity Dry • ohms/cm • 1.9 x 107
OTHER
Specific Gravity • 0.935
Water Absorption/24hr • % • 0.03
| | | | | NORYL® SD (Static-Dissipative)
Static-Dissipative Polyphenylene Oxide
Non-sloughing carbon-filled material with resistivity levels in the 107 - 108 range with good tensile and flexural strength, and extremely low moisture absorption. Mechanically tough, easily machined, relatively lightweight, and thermally stable to 300°F.
MECHANICAL
Tensile Strength@Yield • 103psi • 8.6
Tensile Elongation@Break • % • 20.0
Flexural Strength • 103psi • 13.7
Flexural Modulus • 103psi • 347.0
Izod Impact Strength
Notched • ft-lbs/in • 2.3
Hardness - Shore D • 84
THERMAL
Heat Deflection Temperature
66 psi • °F • 310
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 107 - 108
Volume Resistivity Dry • ohms/cm • 107 - 108
Static Decay, 15% RH • seconds • 0.03(+5000volts)/0.04(-5000volts)
OTHER
Specific Gravity • 1.1
| | | | | PES CN-F (Conductive)
Conductive Polyethersulfone
Non-sloughing carbon-fiber-filled material with high mechanical strength, and thermal stability to 408°F.
This material is UL94 V-0 rated as thin as .060", can be easily machined to tight tolerances, and has good overall mechanical properties.
MECHANICAL
Tensile Strength@Yield • 103psi • 14.8
Tensile Elongation@Break • % • 5.0
Izod Impact Strength
Notched • ft-lbs/in • 0.9
Hardness - Shore D • 86
THERMAL
Heat Deflection Temperature
264 psi • °F • 408
66 psi • °F • 419
Flammability Rating, UL94 • (thickness:.030") • V-0
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 102 - 106
Volume Resistivity Dry • ohms/cm • 102 - 106
OTHER
Specific Gravity • 1.4
Water Absorption/24hr • % • 0.48
| | | | | POMALUX® CN-F (Conductive)
Conductive Acetal Copolymer
Non-sloughing carbon-fiber-filled material which is extremely strong and stiff with excellent dimensional stability. Abrasion-resistant, highly chemical-resistant, with temperature resistance to 320°F.
MECHANICAL
Tensile Strength@Yield • 103psi • 11.8
Tensile Elongation@Break • % • 3.5
Flexural Strength • 103psi • 13.7
Flexural Modulus • 103psi • 1350.0
Izod Impact Strength
Notched • ft-lbs/in • 1.0
Unnotched • ft-lbs/in • 3.0
Hardness - Shore D • 88
THERMAL
Heat Deflection Temperature
264 psi • °F • 320
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 102 - 106
Volume Resistivity Dry • ohms/cm • 103 - 107
OTHER
Specific Gravity • 1.46
Water Absorption/24hr • % • 0.23
| | | | | POMALUX® CN-SS (Conductive)
Conductive Acetal Copolymer
Stainless-steel-fiber-filled, non-sloughing, dimensionally stable material HDT @ 264 psi of 225°F. This material has relatively high chemical resistance, is extremely strong and stiff, and is an excellent choice for situations where carbon-based conductive fillers are not acceptable. Easily machined with carbide-tipped tooling to tight tolerances.
MECHANICAL
Tensile Strength@Yield • 103psi • 8.6
Flexural Strength • 103psi • 13.0
Flexural Modulus • 103psi • 400.0
Izod Impact Strength
Notched • ft-lbs/in • 0.7
Hardness - shore D • 86
THERMAL
Heat Deflection Temperature
264 psi • °F • 225
Flammability rating, UL94 • (thickness:.030") • HB
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 102 - 106
Volume Resistivity • ohms/cm • 102 - 106
OTHER
Specific Gravity • 1.5
| | | | | POMALUX® SD-A (Anti-Static)
Static-Dissipative Acetal Copolymer
Non-carbon-filled, permanently static-dissipative material which is non-migratory and non-humidity dependent. With enhanced lubricity, POMALUX SD-A provides superior wear resistance and ease of machining.
Its extremely low outgassing values and non-sloughing characteristics make it ideal for applications where particulate generation cannot be tolerated. Enhanced lubricity, chemically resistant, and dimensionally stable.
MECHANICAL
Tensile Strength@Yield • 103psi • 6.2
Tensile Elongation@Break • % • 35.0
Flexural Strength • 103psi • 8.6
Flexural Modulus • 103psi • 260.0
Izod Impact Strength
Notched • ft-lbs/in • 1.3
Unnotched • ft-lbs/in • 30.0
Hardness - Shore D • 76
THERMAL
Heat Deflection Temperature
264 psi • °F • 192
66 psi • °F • 312
Coefficient of Thermal Expansion • in/in/°F • 6.5 x 10-5
Thermal Conductivity • Watts/m°F • 0.294
Flammability Rating, UL94 • (thickness:.030") • HB
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 109 - 1011
Volume Resistivity Dry • ohms/cm • 109 - 1011
Static Decay, 15% RH • seconds • 0.18
OTHER
Specific Gravity • 1.33
Water Absorption/24hr • % • 2.50
| | | | | PROPYLUX® CN-F (Conductive)
Conductive Polypropylene
Non-sloughing, carbon-fiber-filled material with good chemical resistance, high strength and stiffness, and good temperature resistance to 215°F. This material is light weight, easily machined and fabricated, and has good overall mechanical properties.
MECHANICAL
Tensile Strength@Yield • 103psi • 6.0
Tensile Elongation@Break • % • 5.0
Flexural Strength • 103psi • 8.0
Flexural Modulus • 103psi • 625.0
Izod Impact Strength
Notched • ft-lbs/in • 1.0
Unnotched • ft-lbs/in • 5.0
Hardness - Shore D • 63
THERMAL
Heat Deflection Temperature
264 psi • °F • 215
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 102 - 106
Volume Resistivity Dry • ohms/cm • 102 - 106
OTHER
Specific Gravity • 0.95
Water Absorption • % • 0.01
| | | | | PROPYLUX® CN-P (Conductive)
Conductive Polypropylene
Carbon-powder-filled lightweight material with good chemical resistance, extremely low water absorption level, and high impact resistance (no break, notched or unnotched). Rated UL94 V-0.
MECHANICAL
Tensile Strength@Yield • 103psi • 2.6
Tensile Elongation@Break • % • 25.0
Flexural Strength • 103psi • 3.0
Flexural Modulus • 103psi • 80.0
Izod Impact Strength
Notched • ft-lbs/in • No Break
Unnotched • ft-lbs/in • No Break
THERMAL
Heat Deflection Temperature
264 psi • °F • 125
Flammability Rating, UL94 • (thickness:.030") • V-0
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 102 - 106
Volume Resistivity Dry • ohms/cm • 102 - 106
OTHER
Specific Gravity • 1.00
Water Absorption/24hr • % • 0.02
| | | | | PROPYLUX® SD-A (Anti-Static)
Static-Dissipative Polypropylene
Non-carbon-filled, permanently static-dissipative material, with good chemical resistance and mechanical properties. This material is light weight, weldable, easily machined and fabricated, available in natural or black color, and has moderate transparency at thinner gauges.
MECHANICAL
Tensile Strength@Yield • 103psi • 4.4
Tensile Elongation@Break • % • 200.0
Flexural Strength • 103psi • 6.2
Flexural Modulus • 103psi • 200.0
Izod Impact Strength
Notched • ft-lbs/in • 1.4
Unnotched • ft-lbs/in • No Break
Hardness - Shore D • 72
THERMAL
Heat Deflection Temperature
264 psi • °F • 135
Flammability Rating, UL94 • (thickness:.030") • HB
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 109 - 1011
Volume Resistivity Dry • ohms/cm • 109 - 1011
OTHER
Specific Gravity • .094
Water Absorption/24hr • % • 1.00
| | | | | PVDF CN-F (Conductive)
Conductive KYNAR® Polyvinylidene Fluoride
Non-sloughing carbon-fiber-filled material with resistance to most chemicals and solvents. Mechanically strong and tough, thermally stable to 335°F, flame and abrasion resistant, and easily fabricated into finished parts.
MECHANICAL
Tensile Strength@Yield • 103psi • 20.5
Tensile Elongation@Break • % • 4.5
Flexural Strength • 103psi • 26.5
Flexural Modulus • 103psi • 1240.0
Izod Impact Strength
Notched • ft-lbs/in • 1.7
Unnotched • ft-lbs/in • 10.0
Hardness - Shore D • 82
THERMAL
Heat Deflection Temperature
264 psi • °F • 335
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 102 - 106
Volume Resistivity • ohms/cm • 102 - 106
OTHER
Specific Gravity • 1.77
| | | | | PVDF CN-P (Conductive)
Conductive KYNAR® Polyvinylidene Fluoride
Carbon-powder-filled, thermally stable, conductive material with consistent resistivities <105. This material is extremely tough with good flame and abrasion-resistance.
Resistant to many chemistries and solvents, including strong acids. Due to the carbon powder fill, this material is also available in film format as thin as .002".
MECHANICAL
Tensile Strength@Yield • 103psi • 5.2
Tensile Elongation@Break • % • 15.0
Flexural Strength • 103psi • 6.5
Flexural Modulus • 103psi • 135.0
Izod Impact Strength
Notched • ft-lbs/in • No Break
Unnotched • ft-lbs/in • No Break
THERMAL
Heat Deflection Temperature
264 psi • °F • 133
ELECTRICAL
Surface Resistivity Dry • ohms/sq • <105
Volume Resistivity Dry • ohms/cm • <105
OTHER
Specific Gravity • 1.74
Water Absorption/24hr • % • <0.06
| | | | | TEMPALUX® CN-F (Conductive)
Conductime Polyetherimide
Non-sloughing carbon-fiber-filled material which is extremely strong and stiff, has excellent dimensional stability, and high temperature resistance to 415°F. This material has broad chemical resistance and excellent fabrication finishing characteristics. UL94 V-0 rated.
MECHANICAL
Tensile Strength@Yield • 103psi • 29.0
Tensile Elogation@Break • % • 2.0
Flexural Strength • 103psi • 42.0
Flexural Modulus • 103psi • 1800.0
Izod Impact Strength
Notched • ft-lbs/in • 1.3
Unnotched • ft-lbs/in • 7.5
Hardness - Shore D • 92
THERMAL
Heat Deflection Temperature
264 psi • °F • 415
Coefficient of Thermal Expansion • in/in/°F • 2.2 x 10-5
Flammability Rating, UL94 • (thickness:.030") • V-0
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 104 - 105
Volume Resistivity Dry • ohms/cm • 104 - 105
OTHER
Specific Gravity • 1.34
Water Absorption/24hr • % • 0.21
| | | | | ZELUX® SD-P (Static-Dissipative)
Static-Dissipative Polycarbonate
Carbon-powder-filled material with resistivity levels in the 107 - 1011 range with high flexural strength and good thermal stability to 270°F. UL94 V-0 rated at .030", this material is thermoformable in .010" - .060" gauges, and has low outgassing properties.
MECHANICAL
Tensile Strength@Yield • 103psi • 9.5
Tensile Elongation@Break • % • 5.0
Flexural Strength • 103psi • 15.5
Flexural Modulus • 103psi • 450.0
Izod Impact Strength
Notched • ft-lbs/in • 1.5
Hardness - Shore D • 78
THERMAL
Heat Deflection Temperature
264 psi • °F • 270
Flammability Rating, UL94 • (thickness:.030") • V-0
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 107 - 1012
Volume Resistivity Dry • ohms/cm • 107 - 1012
OTHER
Specific Gravity • 1.29
Water Absorption/24hr • % • 0.18
| | | | | ZELUX® CN-P & CN-SS
Conductive Polycarbonate
The CN-P material is carbon-powder-filled, while the CN-SS is filled with small non-sloughing stainless steel fibers. Both have high flexural strength and good thermal stability to 275°F. The CN-SS material has excellent impact strength, while the CN-P is UL94 V-0 rated at .030" and is thermoformable in thinner gauges (.010" - .060").
CN-P (Conductive)
Mechanical Properties for CN-P
MECHANICAL
Tensile Strength@Yield • 103psi • 9.4
Tensile Elongation@Break • % • 5.0
Flexural Strength • 103psi • 15.5
Flexural Modulus • 103psi • 460.0
Izod Impact Strength
Notched • 1.4
Hardness - Shore D • 62
THERMAL
Heat Deflection Temperature
264 psi • °F • 270
Flammability Rating, UL94 • (thickness:.030") • V-0
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 103 - 106
Volume Resistivity Dry • ohms/cm • 103 - 106
OTHER
Specific Gravity • 1.32
Water Absorption/24hr • % • 0.16
CN-SS (Conductive)
Mechanical properties for CN-SS material.
MECHANICAL
Tensile Strength@Yield • 103psi • 7.5
Tensile Elongation@Break • % • 7.0
Flexural Strength • 103psi • 12.0
Flexural Modulus • 103psi • 350.0
Izod Impact Strength
Notched • ft-lbs/in • 1.8
Unnotched • ft-lbs/in • 20.0
THERMAL
Heat Deflection Temperature
264 psi • °F • 275
ELECTRICAL
Surface Resistivity Dry • ohms/sq • 102 - 105
Volume Resistivity Dry • ohms/cm • 102 - 105
OTHER
Specific Gravity • 1.26
Water Absorption/24hr • 0.13
| |
|